Pulsar Watch Repair Near Me

Pulsar watches are known for their quality craftsmanship. They’re also known for their use of light-emitting diodes (LEDs) in their digital displays, which is something that sets them apart from other watches on the market. Below I will discuss where to get one repair, warranty info, and other FAQs. I will also share my experience with the Pulsar watch repair near me.

Map of Pulsar Watch Repair Near Me

For “Pulsar Watch Repair Near Me’, see the map below…

A Note on The Pulsar Brand

Pulsar was first introduced in 1970 as a brand of the American Hamilton Watch Company. Developed jointly by American companies Hamilton and Electro/Data Inc., it was the first LED watch available on the market. Today, Pulsar is a division of Seiko Watch Corporation of America (SCA) and mostly produces analog watches that use movements also found in Seikos, such as the 7T62 quartz chronograph movement.

Unauthorized Pulsar Watch Repairs

Technically a local watch repair shop or jeweler can complete any repair work you need, but that does not mean they are authorized. Unauthorized service does not void the warranty, but if any damage is caused by someone unauthorized it would not be covered.

Still, local repair shops have their benefits. It can make sense to visit a local watch repair if:

• You are looking for a faster turnaround time.
• Want to speak to a repair technician in person.
• Have already had your warranty expire.

How Long is a Pulsar Watch Warranty

Pulsars have a limited liability warranty covered by SCA for 3 years from the date of purchase. The warranty covers defects due to faulty materials or craftsmanship, subject to use under normal conditions. To make a claim a warranty coupon is required.’

Read the warranty here.

Pulsar Battery Replacement

If you need a Pulsar battery replacement the cost is usually around $10-20. You should change the battery every 1 to 3 years even if it hasn’t failed.

For a waterproof or water-resistant watch, you should seek a professional to swap the battery out. The water-sealing on the watch needs to be maintained and opening the casing can damage that. A pro technician will check the gasket, reseal the back, and run a water test to ensure the internal components are protected.

Crystal Repair/Replacement

Pulsar offers an affordable watch that is composed of either acrylic or mineral glass crystals. Acrylic crystals are cheaper than their mineral glass counterpart but also scratch more easily.

Though Mineral Glass costs a bit more, it is harder and will withstand scratches better.

If you own a Pulsar with a mineral glass crystal, no worries! AnyPulsarservice center authorized dealer can replace it for you. There may be a few models that use more expensive sapphire crystals.

A spare crystal for most Pulsar timepieces costs between $25 and $30. It is possible to replace the crystal yourself, but it is not recommended.

Band or Strap Repairs/Replacement

Pulsar watch bands and straps are usually made of stainless steel, leather, or nylon. These materials are all easy to find replacements for if needed.

Stainless steel bracelets can be found at any jeweler or watch repair shop. Leather and nylon straps can be replaced with generic versions easily as well. You can find these at most department stores or online.

However, if your watch has a more unique band it may need to be special ordered. In this case, you will likely have to visit an authorized Pulsar service center for the repair.

Resizing

If your Pulsar watch bracelet is too big or small, you can have it resized at a jewelry store or watch repair shop. This is a fairly simple process that shouldn’t cost more than $20-30. Visiting the same store you purchased the timepiece might get you a complimentary free resizing.

Most Pulsars use standard watch pins that are easy to remove and replace. However, some models have soldered pins or hidden clasps that require special tools to adjust. In this case, you will need to take it to a watchmaker or Pulsar service center for the resize.

Pulsars with leather or nylon straps can usually be cut down to size at home with a pair of scissors. Just be careful not to cut too much off as it cannot be undone!

Crown and Stem Repair Work

The crown is the knob on the side of the watch that is used to set the time and date. The stem is the thin metal rod that extends from the movement to the crown.

If your crown or stem is not functioning properly, it will need to be repaired or replaced. This type of repair is usually only needed if the watch has been dropped or damaged in some way.

To repair a broken crown or stem, you will need to take it to a Pulsar service center or authorized watchmaker. They will be able to replace the broken parts and get your watch ticking again.

Movement Repairs

The movement is the internal mechanism that causes the watch to operate. These watches are made by Seiko and therefore use Seiko movements. Seiko makes a really good quartz watch movement that doesn’t typically have many issues.

However, if your Pulsar watch is not working properly, it may need to be serviced. This type of repair is usually only needed if the watch has been dropped or damaged in some way.

To service a Pulsar watch, you will need to take it to a Pulsar service center or authorized watchmaker. They will be able to properly clean and lubricate the movement, as well as replace any broken parts.

Dealing With a Pulsar Authorizes Service Center

The Seiko service network can help you with any after-sales service needs you have for your Pulsar watch. They have state of the art facilities that are manned by experienced and qualified watchmakers who will be able to take care of any repairs or restoration work that needs to be carried out.

Since Pulsar is a Seiko brand, you need to work through Seiko. Only authorized service centers can perform repairs. This implies that they may guarantee their work for six to twelve months after the repairs are finished. They will provide you with a free written estimate to let you know how much it will cost to repair your watch if you send it in.

The only downside is that you cannot conduct this evaluation over the phone–they need to have the watch in their possession. However, if your watch is covered under Pulsar’s warranty, they will honor it as long as you include the warranty card and original receipt when mailing it in. If the issue with your watch falls outside of what is covered by the warranty, they will send an email with estimated repair costs included.

You’ll have to provide your contact information, an email address, a case back number, a serial number, and a description of the problem when sending us an inquiry.

Here is where you can find Seiko Customer Services Centers around the world if you need to mail in your watch.

Tips for Sending Your Watch to an Authorized Pulsar Service Center

• The more specific you are about the problem, the easier it is for us to communicate and figure out a solution quickly. State what the problem is, if time is being gained or lost, and every detail matters for them to help you solve your issue.
• Guess the value of your watch (even if you don’t have a receipt) and include that number in your package.
• Put the watch’s description on the envelope. If your watch is damaged at the factory, they may match it to your envelope and paperwork.
• Using adequate packing and bubble wrap, properly pack the watch.
• If you are making a warranty claim include the required warranty information.
• Add tracking to your shipment.

Can you Fix a Pulsar Watch Yourself?

Pulsar watches are made with high-quality parts, but they are still delicate instruments. If your watch is not working properly, it is best to take it to a Pulsar service center or authorized watchmaker.

Attempting to fix a Pulsar watch yourself could void the warranty, and you could end up doing more harm than good. Only attempt to repair your Pulsar watch if you are experienced in watch repair and have the proper tools.

If you do decide to try to fix your Pulsar watch yourself, here are a few things to keep in mind:

• Don’t force anything. If a part is stuck, apply some lubricant and try again. Forcing it could damage the watch.
• Be careful when removing the back of the watch. The gasket needs to be replaced if it is damaged.
• Only use high-quality tools designed for watch repair.
• Be careful not to lose any small parts.
• Follow the instructions in the manual carefully.

Other Resources for Pulsar Watch Repair Near Me

Although my first inclination when something goes wrong is to reach out to a local Pulsar repair shop, sometimes that isn’t enough. If you’re still looking for ideas after reading this post, try these resources to get more info or ask the community…

• Pulsar Wiki Page
• Seiko Homepage
• Pulsar Homepage
• R/Watches Reddit
• The Watch Forum – Pulsar Thread
• The Digital Watch Forum

Popular Pulsar Watch Models

When you call the Pulsar watch repair near me, the first question is, “what model do you have”. This information is essential for a technician to be able to determine the age, functions, and type of movement of the watch. Here is a list of popular Pulsar models:

List of Popular Pulsar watch models:

• Solar Chronograph (Ref: PX5033)
• Men’s Two-Tone Calendar Dress Watch (Ref: PJ6052)
• Sports Chronograph Watch (Ref: PU2007)
• Women’s Dress Watch (Ref: PY5003)
• Quartz Dive Watch (Ref: PXH227)
• Brown Leather Dress Watch with Chronograph (Ref: PT3789X)
• On the Go Solar Two-Tone Chronograph (Ref: PX5057)
• Alarm Chronograph (Ref: PF3547)

Pulsar Watch Repair Near Me

Pulsar watches are built to last, but even the most well-made watch can experience problems from time to time. If your Pulsar watch needs repair, there are a few things you should keep in mind.

First, try reaching out to a Pulsar service center or authorized watchmaker. These professionals will have the experience and knowledge necessary to properly repair your watch.

If you decide to attempt to fix your Pulsar watch yourself, be sure to use high-quality tools and follow the instructions in the manual carefully. Remember, forcing a stuck part or using the wrong tools could damage your watch further.

Finally, if you’re still having trouble finding a Pulsar repair shop near you, try searching online for more resources or asking the community for help. With a little effort, you should be able to find the help you need to get your Pulsar watch working again.

That’s my experience with the Pulsar watch repair near me.